DESAL-BWRO KP ·L BRACKISH-WATER CONFIGURATION
KP-135-L
571.67L/h
A source-confirmed commercial and industrial configuration with verified water-class boundary, equipment data, STD code and approved net price.
MAXIMUM CONDUCTIVITY10,000µS/cm
STD-0041KP-L CONFIGURATION
CONFIRMED PRODUCT13,720L/day1.1 kW HP pump€13,110 reference
571.67L/hCATALOG OUTPUT
L·10,000µS/cm MAXIMUM FEED
50ppmPERMEATE REFERENCE
18kg/cm²MAXIMUM PRESSURE
STD-0041PUBLIC STD CODE
CONFIRMED PRODUCT DATA
One configuration, one verified record.
Every value shown below belongs specifically to STD-0041. The ppm value remains a source reference and is not an automatic conversion from conductivity.
Check selection with FinderPRODUCTION PLANNING
Nominal water volume by operating time.
Use these arithmetic values only for early storage and runtime planning, then verify the selected duty against the water analysis and actual conditions.
Operating timeCalculated nominal volume
4 hours2,286.68L
6 hours3,430.02L
8 hours4,573.36L
12 hours6,860.04L
20 hours11,433.4L
Calculation: 571.67 L/h × operating hours. This is not guaranteed project output.CONFIRMED INSTALLATION ENVELOPE
460×1,280×550mm
The separate source reference for the prefilter or vessel is ⌀334 x V1,506. The complete project layout must add piping, valves, service access, drain, electrical equipment, pretreatment and product-water storage.
UNIT ENVELOPE460×1,280×550mmPREFILTER / VESSEL⌀334 x V1,506HP PUMP1.1kWVFDNo
TECHNICAL DATA BOUNDARY
Missing fields remain unfilled.
The current KP master record does not confirm the following items. They are defined through the selected-code datasheet and approved CWG proposal.
Average operating pressureRecommended feed-inlet pressureMinimum feed-inlet pressureBooster-pump powerMembrane configurationRecovery and reject-water flowDry and shipping massGuaranteed project performance
DESAL-BWRO-KP-135-L FAQ
Answers before engineering approval.
01What is the published output of DESAL-BWRO-KP-135-L?
The source-confirmed catalog values are 571.67 L/h and 13,720 L/day. Final guaranteed output requires verified water and approved operating conditions.
02Which feed-water class applies to STD-0041?
L is confirmed for feed up to 10,000 µS/cm, with 6,000 ppm retained as the separate source reference. Full water chemistry is still required.
03What product-water data is confirmed?
The source record states 99% salt rejection and a 50 ppm permeate reference. These are catalog references, not a project guarantee.
04Which installation data is confirmed?
The unit envelope is 460 × 1,280 × 550 mm and the separate prefilter or vessel reference is ⌀334 x V1506. Service clearances and project interfaces must be added to the layout.
05Is the displayed price a final quotation?
No. €13,110 is a approved net equipment price, excluding VAT and transport, EXW CWG Croatia. Technical scope follows project approval.
READY FOR KP CONFIGURATION REVIEW?
Send the water analysis, demand and site data.
CWG will confirm STD-0041, pretreatment, recovery, interfaces, guaranteed duty and final commercial scope.