DESAL-BWRO KP ·R BRACKISH-WATER CONFIGURATION
KP-320-R
1,333L/h
A source-confirmed commercial and industrial configuration with verified water-class boundary, equipment data, STD code and approved net price.
MAXIMUM CONDUCTIVITY22,000µS/cm
STD-0068KP-R CONFIGURATION
CONFIRMED PRODUCT32,100L/day4 kW HP pump€27,250 reference
1,333L/hCATALOG OUTPUT
R·22,000µS/cm MAXIMUM FEED
50ppmPERMEATE REFERENCE
31kg/cm²MAXIMUM PRESSURE
STD-0068PUBLIC STD CODE
CONFIRMED PRODUCT DATA
One configuration, one verified record.
Every value shown below belongs specifically to STD-0068. The ppm value remains a source reference and is not an automatic conversion from conductivity.
Capacity pair requires confirmation. The source lists 32,100 L/day and 1,333 L/h. They are retained without correction because the approved source is internally inconsistent.
Check selection with FinderCAPACITY DATA REVIEW
Request capacity confirmation No derived production table is published.
The approved source values for this model do not form a consistent L/day and L/h pair. SEAMASTER keeps both original values visible and waits for written confirmation before calculating runtime volumes.
CONFIRMED INSTALLATION ENVELOPE
810×1,280×620mm
The separate source reference for the prefilter or vessel is ⌀470 x V1957. The complete project layout must add piping, valves, service access, drain, electrical equipment, pretreatment and product-water storage.
UNIT ENVELOPE810×1,280×620mmPREFILTER / VESSEL⌀470 x V1957HP PUMP4kWVFDYes
TECHNICAL DATA BOUNDARY
Missing fields remain unfilled.
The current KP master record does not confirm the following items. They are defined through the selected-code datasheet and approved CWG proposal.
Average operating pressureRecommended feed-inlet pressureMinimum feed-inlet pressureBooster-pump powerMembrane configurationRecovery and reject-water flowDry and shipping massGuaranteed project performance
DESAL-BWRO-KP-320-R FAQ
Answers before engineering approval.
01What is the published output of DESAL-BWRO-KP-320-R?
The source lists 1,333 L/h and 32,100 L/day, but those two values are not mathematically consistent. Both are retained with a review warning and no derived runtime calculation is published.
02Which feed-water class applies to STD-0068?
R is confirmed for feed up to 22,000 µS/cm, with 15,000 ppm retained as the separate source reference. Full water chemistry is still required.
03What product-water data is confirmed?
The source record states 99.2% salt rejection and a 50 ppm permeate reference. These are catalog references, not a project guarantee.
04Which installation data is confirmed?
The unit envelope is 810 × 1,280 × 620 mm and the separate prefilter or vessel reference is ⌀470 x V1957. Service clearances and project interfaces must be added to the layout.
05Is the displayed price a final quotation?
No. €27,250 is a approved net equipment price, excluding VAT and transport, EXW CWG Croatia. Technical scope follows project approval.
READY FOR KP CONFIGURATION REVIEW?
Send the water analysis, demand and site data.
CWG will confirm STD-0068, pretreatment, recovery, interfaces, guaranteed duty and final commercial scope.