01 · MARINE RANGEDESAL-SWRO PM · A / B / E
62.5–1,041.67 L/h
Eleven catalog capacities for marine and higher-output seawater duties, including A, B and E equipment configurations.
11CATALOG MODELS56,000µS/cm MAX DUTY
Open detailed PM catalog DESAL-SWRO PM · PM-C · SEAWATER REVERSE OSMOSIS
Fresh water from the sea.
62.5–1,250 L/h
Compact and marine seawater desalination for yachts, villas, hotels, resorts, islands and remote facilities.
SEAWATER DUTY≤ 56,000 µS/cm
DESAL-SWROPM · PM-C PLATFORM
DESAL-SWRO PM62.5–1,041.67 L/h
DESAL-SWRO PM-C125–1,250 L/h
Seawater dutyUp to 56,000 µS/cm
22 catalog configurationsA · B · C · E routes
Engineering gateFinal performance verified
NEW ENGINEERING GUIDE
Open the guide Seawater RO pretreatment: why it matters
Follow intake risk, filtration, chemistry and monitoring from the source to the protected RO-feed boundary.
QUICK ANSWER03
Should I choose DESAL-SWRO PM or PM-C?
Choose DESAL-SWRO PM when the marine-oriented A, B or E configuration and capacities from 62.5 L/h are required. Choose DESAL-SWRO PM-C for a compact fixed-installation range from 125 to 1,250 L/h. The final selection depends on seawater analysis, operating hours and installation conditions.
DESAL-SWRO PRODUCT SERIES
Two platforms for marine and fixed installations.
The series define configuration and capacity. Pretreatment, recovery and final performance are engineered around the actual feed water and project duty.
01 · MARINE RANGE02 · COMPACT RANGEDESAL-SWRO PM-C · C
125–1,250 L/h
Eleven catalog configurations across ten capacity levels for villas, hotels, resorts, islands and other fixed seawater installations.
11CONFIGURATIONS56,000µS/cm MAX DUTY
Open detailed PM-C catalog COMPLETE CATALOG OVERVIEW
DESAL-SWRO PM and PM-C models.
Only source-confirmed capacities, codes, technical fields and approved net prices are shown. Final performance and commercial scope are confirmed after engineering review.
01
A · B · E CONFIGURATIONS
11 MODELSDESAL-SWRO PM
| Model | Output | Code | Config. | approved net price |
|---|---|---|---|---|
| DESAL-SWRO-PM-15-A | 62.5L/h | STD-0101 | A | €12,650 |
| DESAL-SWRO-PM-30-A | 125L/h | STD-0102 | A | €13,875 |
| DESAL-SWRO-PM-40-B | 166.67L/h | STD-0103 | B | €15,960 |
| DESAL-SWRO-PM-50-B | 208.33L/h | STD-0104 | B | €17,680 |
| DESAL-SWRO-PM-63-B | 260.42L/h | STD-0105 | B | €18,980 |
| DESAL-SWRO-PM-75-B | 312.5L/h | STD-0106 | B | €19,966 |
| DESAL-SWRO-PM-85-E | 354.17L/h | STD-0107 | E | €24,680 |
| DESAL-SWRO-PM-125-E | 520.83L/h | STD-0108 | E | €28,877 |
| DESAL-SWRO-PM-150-E | 625L/h | STD-0109 | E | €33,987 |
| DESAL-SWRO-PM-200-E | 833.33L/h | STD-0110 | E | €39,960 |
| DESAL-SWRO-PM-250-E | 1,041.67L/h | STD-0111 | E | €45,345 |
02
COMPACT C CONFIGURATION
11 CONFIGURATIONSDESAL-SWRO PM-C
| Model | Output | Code | approved net price | HP pump | VFD | Power | Unit dimensions | Prefilter |
|---|---|---|---|---|---|---|---|---|
| DESAL-SWRO-PM-30-C | 125L/h | STD-0090 | €17,350 | 2.2kW | No | II–III | 690 × 1,400 × 690 mm | Ø334 × V1,506 mm |
| DESAL-SWRO-PM-30-C-3 | 125L/h | STD-0091 | €18,560 | 2.2kW | No | II–III | 690 × 1,400 × 690 mm | Ø334 × V1,506 mm |
| DESAL-SWRO-PM-55-C | 229.17L/h | STD-0092 | €19,895 | 3kW | No | II–III | 690 × 1,400 × 690 mm | Ø410 × V1,835 mm |
| DESAL-SWRO-PM-85-C | 354.17L/h | STD-0093 | €23,220 | 4kW | Yes | II–III | 690 × 1,400 × 690 mm | Ø410 × V1,835 mm |
| DESAL-SWRO-PM-100-C | 416.67L/h | STD-0094 | €24,135 | 4kW | Yes | II–III | 740 × 1,380 × 760 mm | Ø460 × V1,838 mm |
| DESAL-SWRO-PM-125-C | 520.83L/h | STD-0095 | €30,105 | 4kW | Yes | II–III | 740 × 1,380 × 760 mm | Ø460 × V1,838 mm |
| DESAL-SWRO-PM-150-C | 625L/h | STD-0096 | €32,055 | 4kW | Yes | II–III | 740 × 1,380 × 760 mm | Ø460 × V1,838 mm |
| DESAL-SWRO-PM-175-C | 729.17L/h | STD-0097 | €37,405 | 5.5kW | Yes | II–III | 740 × 1,380 × 760 mm | Ø530 × V2000 mm |
| DESAL-SWRO-PM-200-C | 833.33L/h | STD-0098 | €38,480 | 5.5kW | Yes | II–III | 740 × 1,380 × 760 mm | Ø610 × V2000 mm |
| DESAL-SWRO-PM-250-C | 1,041.67L/h | STD-0099 | €43,400 | 7.5kW | Yes | II–III | 740 × 1,380 × 760 mm | Ø610 × V2000 mm |
| DESAL-SWRO-PM-300-C | 1,250L/h | STD-0100 | €46,985 | 7.5kW | Yes | II–III | 740 × 1,380 × 760 mm | Ø760 × V2100 mm |
Approved net prices exclude VAT and transport; EXW CWG Croatia. Final technical scope requires project approval. PM-30-C-3 is retained as a separate source-confirmed configuration; the commercial meaning of the “-3” suffix still requires confirmation.
APPLICATION-BASED DESIGN
Where will the DESAL-SWRO system operate?
Duty cycle, seawater conditions, installation environment and required product-water quality define the complete plant.
SEAWATER RO · PROJECT VERIFIEDFINAL ENGINEERING INPUTS
Capacity is only the first decision.
Seawater conductivity and temperatureDefines pressure and expected membrane output
Required daily product waterDefines design flow and operating schedule
Intake and installation conditionsDefines pretreatment, materials and layout
Required water qualityDefines post-treatment and final guarantee
SEAMASTER WATERMAKER FINDER™
Open Finder From daily demand to a DESAL-SWRO recommendation.
Select the application, choose seawater and enter the required capacity. The Finder provides the catalog starting point for engineering.
SEAWATER DESALINATION FAQ
Answers before final selection.
01What is the difference between DESAL-SWRO PM and PM-C?
DESAL-SWRO PM covers A, B and E catalog configurations from 62.5 to 1,041.67 L/h and includes marine-oriented capacity options. DESAL-SWRO PM-C is the compact C configuration from 125 to 1,250 L/h for villas, hospitality and other fixed installations.
02Can the same model be used at every seawater salinity?
No. The catalog platform covers seawater duty up to 56,000 µS/cm, but final output and operating settings depend on actual conductivity, temperature, pressure and installation conditions. A current water analysis is required.
03How is the required hourly capacity calculated?
Divide the required daily product-water volume by realistic operating hours, then include an engineering reserve. The Finder performs this preliminary calculation and selects the smallest qualifying catalog capacity.
04What pretreatment is required before the SWRO system?
Pretreatment depends on the intake, turbidity or SDI, organic loading and scaling risk. Filtration, dosing and monitoring are defined during engineering to protect the high-pressure pump and membranes.
05Are catalog flow rates guaranteed?
Catalog capacities are used for preliminary comparison. Guaranteed production, recovery, product-water quality and energy requirements are confirmed only in the final approved technical proposal.
READY FOR SWRO ENGINEERING?
Send the seawater analysis and daily demand.
We will confirm the DESAL-SWRO model, pretreatment, recovery, electrical supply and product-water specification.