DESAL-BWRO XP · COMPACT BRACKISH-WATER RO
DESAL-BWRO
XP16
Choose XP 16 when 67.5 L/h covers the water balance and the confirmed catalog route is LR or M.
NOMINAL OUTPUT67.5L/h
LR + MCATALOG CONFIGURATIONS
Compact applicationsVILLAS · HOSPITALITY · LIGHT DUTY
67.5L/hNOMINAL OUTPUT
1,620L/day24-HOUR RATING
LR + MCATALOG CONFIGURATIONS
Engineering gateWATER ANALYSIS REQUIRED
CONFIRMED PRODUCT DATA
Mid-range LR / M platform for measured brackish-water duty.
A higher-output LR or M route for villas, hospitality support and controlled light-commercial duty. The page now separates confirmed configuration data from still-missing fields. Final guaranteed performance and supplied scope remain subject to the water analysis and CWG proposal.
Check with Watermaker FinderCATALOG CONFIGURATION MATRIX
Match the exact XP route to measured water.
HL, L and M are feed-conductivity classes. LR is a permeate-quality configuration rated up to 10,000 µS/cm and is not a higher salinity class.
DESAL-BWRO XP 16LR
STD-0023€4,897approved net priceDESAL-BWRO XP 16M
STD-0024€4,897approved net priceConfiguration is only the first selection gate.Hardness, alkalinity, silica, iron, manganese, turbidity, SDI, organics, temperature and seasonal variation define pretreatment and approved operating conditions. Final commercial price and scope are confirmed in the CWG proposal.
PRODUCTION PLANNING
Convert operating time into nominal water volume.
Use this arithmetic for early storage and duty planning. It does not replace verified output, recovery or permeate-quality commitments.
Operating timeNominal calculated volume
8 hours540L
12 hours810L
16 hours1,080L
24 hours1,620L
Calculation uses the displayed hourly rating; the 24-hour row uses the catalog daily rating of 1,620 L/day. Displayed values are preliminary planning figures.AVAILABLE XP 16 CONFIGURATIONS
LR + M routes for one nominal output.
Select the exact configuration only after measured conductivity and full source-water chemistry are reviewed.
01
PERMEATE-QUALITY CONFIGURATIONDESAL-BWRO XP 16LR
Catalog code · STD-0023€4,897approved net price- 67.5 L/h nominal capacity
- 10,000 µS/cm rated feed route
- Permeate-quality configuration rated for feed conductivity up to 10,000 µS/cm; LR is a quality route, not a higher salinity class.
02
M CONDUCTIVITY CLASSDESAL-BWRO XP 16M
Catalog code · STD-0024€4,897approved net price- 67.5 L/h nominal capacity
- 15,500 µS/cm rated feed route
- M feed-conductivity configuration rated at 15,500 µS/cm.
SOURCE-CONFIRMED TECHNICAL DATA
Technical values by XP 16 configuration.
Only values present in the approved master table are shown. Dry mass, booster-pump data, membrane arrangement and recovery remain unlisted.
| Parameter | LRSTD-0023 | MSTD-0024 |
|---|---|---|
| Salt rejection | 99.5% | 98.5% |
| Reference permeate | 15 ppm | 50 ppm |
| Average / maximum pressure | 9 / 16 kg/cm² | 9 / 16 kg/cm² |
| Recommended / minimum inlet | 3 / 1 kg/cm² | 3 / 1 kg/cm² |
| High-pressure pump | 0.37 kW | 0.37 kW |
| Power supply / VFD | 220 V single-phase / No | 220 V single-phase / No |
| Water temperature / feed pH | 3–35 °C / 3–11 | 3–35 °C / 3–11 |
| Unit dimensions (W × H × D) | 425 × 735 × 255 mm | 425 × 735 × 255 mm |
| Prefilter | 140 × 365 mm | 140 × 365 mm |
ANALYSIS · DUTY · PRETREATMENTWATER & SITE REVIEW
Capacity finds the platform. Chemistry protects it.
Conductivity & temperatureMeasured present value plus credible seasonal source-water range.Scaling chemistryHardness, alkalinity, silica and ions relevant to recovery.Fouling & pretreatmentTurbidity, SDI, iron, manganese, organics and microbiology.Site interfacesFeed supply, drain, power, storage, space and service access.
Send water analysis TECHNICAL DATA BOUNDARY
What the selected-code proposal must still confirm.
The source table now confirms the displayed pressure, pump, electrical, dimensional, rejection and permeate values. The remaining items below are not supplied by the available data.
Dry mass and transport weightBooster-pump data, where applicableMembrane configuration and recoveryPretreatment and chemical-conditioning scopeControls, instruments and alarm functionsGuaranteed performance conditions
DESAL-BWRO XP16 FAQ
Answers before the technical proposal.
01How much water can DESAL-BWRO XP 16 produce?
The catalog rating is 67.5 L/h or 1,620 L/day at 24 hours of nominal operation. Actual guaranteed output depends on the approved configuration, feed-water chemistry, temperature, pressure, membrane condition and recovery.
02Which configurations are available for XP 16?
LR + M configurations are cataloged for XP 16. HL, L and M identify rated feed-conductivity routes. LR is a permeate-quality configuration and must not be interpreted as a higher salinity class.
03Can I select the configuration from a TDS estimate?
No automatic TDS-to-conductivity conversion is used for final selection. The conversion factor varies with dissolved-ion composition. Use a current laboratory analysis or calibrated conductivity measurement in µS/cm.
04Does nominal output guarantee final product-water quality?
No. Capacity and feed-conductivity route do not define the final permeate specification. Product-water quality, post-treatment, disinfection, storage hygiene and applicable requirements must be confirmed for the project.
05What is required before quotation?
Send source-water analysis, measured conductivity, temperature range, required daily and hourly output, intended water use, operating hours, utilities, installation constraints, storage and delivery location.
READY FOR CONFIGURATION REVIEW?
Send conductivity, analysis and required daily output.
CWG will confirm XP 16, the applicable LR + M route, pretreatment, recovery and final product-water specification.