DESAL-BWRO XP · COMPACT BRACKISH-WATER RO
DESAL-BWRO
XP23
Choose XP 23 when 96.25 L/h suits the operating window and storage strategy for an HL or L source-water route.
NOMINAL OUTPUT96.25L/h
HL + LCATALOG CONFIGURATIONS
Compact applicationsVILLAS · HOSPITALITY · LIGHT DUTY
96.25L/hNOMINAL OUTPUT
2,310L/day24-HOUR RATING
HL + LCATALOG CONFIGURATIONS
Engineering gateWATER ANALYSIS REQUIRED
CONFIRMED PRODUCT DATA
Higher-output HL / L platform for measured brackish-water duty.
Balanced compact production up to 2.31 m³/day for verified HL or L brackish-water applications. The page now separates confirmed configuration data from still-missing fields. Final guaranteed performance and supplied scope remain subject to the water analysis and CWG proposal.
Check with Watermaker FinderCATALOG CONFIGURATION MATRIX
Match the exact XP route to measured water.
HL, L and M are feed-conductivity classes. LR is a permeate-quality configuration rated up to 10,000 µS/cm and is not a higher salinity class.
DESAL-BWRO XP 23HL
STD-0021€4,897approved net priceDESAL-BWRO XP 23L
STD-0022€4,897approved net priceConfiguration is only the first selection gate.Hardness, alkalinity, silica, iron, manganese, turbidity, SDI, organics, temperature and seasonal variation define pretreatment and approved operating conditions. Final commercial price and scope are confirmed in the CWG proposal.
PRODUCTION PLANNING
Convert operating time into nominal water volume.
Use this arithmetic for early storage and duty planning. It does not replace verified output, recovery or permeate-quality commitments.
Operating timeNominal calculated volume
8 hours770L
12 hours1,155L
16 hours1,540L
24 hours2,310L
Calculation uses the displayed hourly rating; the 24-hour row uses the catalog daily rating of 2,310 L/day. Displayed values are preliminary planning figures.AVAILABLE XP 23 CONFIGURATIONS
HL + L routes for one nominal output.
Select the exact configuration only after measured conductivity and full source-water chemistry are reviewed.
01
HL CONDUCTIVITY CLASSDESAL-BWRO XP 23HL
Catalog code · STD-0021€4,897approved net price- 96.25 L/h nominal capacity
- 6,000 µS/cm rated feed route
- HL feed-conductivity configuration rated at 6,000 µS/cm.
02
L CONDUCTIVITY CLASSDESAL-BWRO XP 23L
Catalog code · STD-0022€4,897approved net price- 96.25 L/h nominal capacity
- 10,000 µS/cm rated feed route
- L feed-conductivity configuration rated at 10,000 µS/cm.
SOURCE-CONFIRMED TECHNICAL DATA
Technical values by XP 23 configuration.
Only values present in the approved master table are shown. Dry mass, booster-pump data, membrane arrangement and recovery remain unlisted.
| Parameter | HLSTD-0021 | LSTD-0022 |
|---|---|---|
| Salt rejection | 98% | 98.5% |
| Reference permeate | 50 ppm | 50 ppm |
| Average / maximum pressure | 7.5 / 12 kg/cm² | 9 / 14 kg/cm² |
| Recommended / minimum inlet | 3 / 1 kg/cm² | 3 / 1 kg/cm² |
| High-pressure pump | 0.37 kW | 0.37 kW |
| Power supply / VFD | 220 V single-phase / No | 220 V single-phase / No |
| Water temperature / feed pH | 3–35 °C / 3–11 | 3–35 °C / 3–11 |
| Unit dimensions (W × H × D) | 425 × 735 × 255 mm | 425 × 735 × 255 mm |
| Prefilter | 140 × 365 mm | 140 × 365 mm |
ANALYSIS · DUTY · PRETREATMENTWATER & SITE REVIEW
Capacity finds the platform. Chemistry protects it.
Conductivity & temperatureMeasured present value plus credible seasonal source-water range.Scaling chemistryHardness, alkalinity, silica and ions relevant to recovery.Fouling & pretreatmentTurbidity, SDI, iron, manganese, organics and microbiology.Site interfacesFeed supply, drain, power, storage, space and service access.
Send water analysis TECHNICAL DATA BOUNDARY
What the selected-code proposal must still confirm.
The source table now confirms the displayed pressure, pump, electrical, dimensional, rejection and permeate values. The remaining items below are not supplied by the available data.
Dry mass and transport weightBooster-pump data, where applicableMembrane configuration and recoveryPretreatment and chemical-conditioning scopeControls, instruments and alarm functionsGuaranteed performance conditions
DESAL-BWRO XP23 FAQ
Answers before the technical proposal.
01How much water can DESAL-BWRO XP 23 produce?
The catalog rating is 96.25 L/h or 2,310 L/day at 24 hours of nominal operation. Actual guaranteed output depends on the approved configuration, feed-water chemistry, temperature, pressure, membrane condition and recovery.
02Which configurations are available for XP 23?
HL + L configurations are cataloged for XP 23. HL, L and M identify rated feed-conductivity routes. LR is a permeate-quality configuration and must not be interpreted as a higher salinity class.
03Can I select the configuration from a TDS estimate?
No automatic TDS-to-conductivity conversion is used for final selection. The conversion factor varies with dissolved-ion composition. Use a current laboratory analysis or calibrated conductivity measurement in µS/cm.
04Does nominal output guarantee final product-water quality?
No. Capacity and feed-conductivity route do not define the final permeate specification. Product-water quality, post-treatment, disinfection, storage hygiene and applicable requirements must be confirmed for the project.
05What is required before quotation?
Send source-water analysis, measured conductivity, temperature range, required daily and hourly output, intended water use, operating hours, utilities, installation constraints, storage and delivery location.
READY FOR CONFIGURATION REVIEW?
Send conductivity, analysis and required daily output.
CWG will confirm XP 23, the applicable HL + L route, pretreatment, recovery and final product-water specification.