DESAL-SWRO PM-E · CONTROLLED TECHNICAL DATA BOUNDARY

PM-125-E
520.83L/h

A higher-output PM-E configuration published only with the fields confirmed in the approved product master.

View confirmed data Request technical confirmation

MAXIMUM CONDUCTIVITY56,000µS/cm

DESAL-SWRO-PM-125-E seawater reverse osmosis system 520.83 L/h

STD-0108PARTIAL TECHNICAL RECORD

CONFIRMED PRODUCT12,500L/dayVFD · No€28,877 reference

520.83L/hNOMINAL OUTPUT

12,500L/dayDAILY CAPACITY

56,000 µS/cmMAXIMUM FEED

No VFDSOURCE-CONFIRMED STATUS

STD-0108PUBLIC STD CODE

CONFIRMED MASTER RECORD

Six public reference fields. Everything else waits for evidence.

This page deliberately avoids a false impression of completeness. The confirmed catalog record is enough for preliminary capacity comparison, not for procurement or final engineering.

Check preliminary capacity

Nominal output520.83L/h

Daily capacity12,500L/day

Maximum conductivity56,000µS/cm

VFD statusNo

Public model codeSTD-0108

approved net price€28,877

PRODUCTION PLANNING

Nominal volume by operating time.

The calculation multiplies catalog output by runtime. It does not create a performance guarantee where operating conditions are not defined.

Operating timeCalculated nominal volume

4 hours2,083.32L

6 hours3,124.98L

8 hours4,166.64L

12 hours6,249.96L

20 hours10,416.6L

Calculation: 520.83 L/h × operating hours. Final production requires verified seawater, temperature and approved duty.

MISSING TECHNICAL FIELDS

No adjacent-model assumptions.

PM-A, PM-B and PM-C values are not reused for this PM-E record. The following items require a selected-code technical datasheet or approved CWG proposal.

Feed salinityppm value not confirmedSalt rejection & permeateproduct-water data not confirmedOperating pressuresaverage and maximum not confirmedInlet pressurerecommended and minimum not confirmedPump powerHP and booster pumps not confirmedElectrical supplyvoltage, phase and load not confirmedOperating envelopetemperature and feed pH not confirmedPhysical datadimensions, prefilter and mass not confirmedRO configurationmembranes and recovery not confirmed

DESAL-SWRO-PM-125-E FAQ

What can—and cannot—be concluded.

01What is confirmed for DESAL-SWRO-PM-125-E?

The approved master confirms 520.83 L/h, 12,500 L/day, a 56,000 µS/cm maximum feed-conductivity reference, no VFD, public code STD-0108 and a €28,877 approved net price.

02Why are pump and dimension fields not displayed?

They are not present in the approved PM-E master records. Values from PM-A, PM-B or PM-C are not transferred to PM-E because configuration and equipment can differ.

03Does no VFD confirm the electrical supply?

No. VFD status and power supply are separate fields. The source confirms no VFD but does not confirm voltage, phase arrangement, frequency, connected load or protection requirements.

04Is the catalog capacity guaranteed?

No. It is a preliminary catalog value. Guaranteed production requires seawater analysis, temperature, intended operating hours, intake conditions and an approved technical proposal.

05What does the approved net price include?

It is the approved net equipment price, excluding VAT and transport, EXW CWG Croatia. The final technical scope requires project approval.

READY FOR PM-E CONFIRMATION?

Request the selected-code technical scope.

Send seawater analysis, required output, operating hours, electrical supply and installation constraints to CWG.

Request STD-0108 proposal Compare all PM models

PM-125-E520.83L/h