DESAL YACHT · MARINE SEAWATER RO · 12/24 V PLATFORM
DESAL YACHT
60 PRO
Choose the 60 L/h family when the vessel needs a balanced combination of production rate, operating time and compact marine integration.
NOMINAL OUTPUT60L/h
STD-0002·STD-0005PRO + PRO TOUCH
Yacht & sailboatMARINE APPLICATION
Seawater ROFEED-WATER ROUTE
12/24 V familyFINAL VOLTAGE VERIFIED
PRO + TouchTWO CONFIGURATIONS
Engineering gateVESSEL DATA REQUIRED
CONFIRMED PRODUCT DATA
Balanced cruising capacity for onboard freshwater production.
Regular cruising, liveaboard use and medium freshwater demand. The available source confirms capacity, 12/24 V DC family, 50,000 µS/cm feed-conductivity limit, catalog codes and net price prices. The proposal defines the selected voltage and complete supplied scope.
Check capacity with FinderPRODUCTION PLANNING
Translate operating time into nominal water volume.
Use the table for early tank and operating-window planning. It multiplies the catalog capacity by operating hours and does not replace the verified production duty.
Operating timeNominal calculated volume
4 hours240L
6 hours360L
8 hours480L
12 hours720L
Calculation: 60 L/h × operating hours. Actual output varies with feed-water temperature, salinity, pressure, membrane condition and installation.TWO CATALOG CONFIGURATIONS
Choose the control route after choosing capacity.
Both prices are net prices from the supplied 2026 source. The final commercial price, selected voltage and included scope are confirmed in the CWG proposal.
01
STANDARD CONTROLDESAL YACHT 60 PRO
Catalog code · STD-0002€4,865net price- 60 L/h nominal capacity family
- 50,000 µS/cm maximum feed conductivity
- 12/24 V DC marine family
02
TOUCH CONTROLDESAL YACHT 60 PRO Touch
Catalog code · STD-0005€4,985net price- 60 L/h nominal capacity family
- 50,000 µS/cm maximum feed conductivity
- 12/24 V DC marine family
COMPACT MARINE INTEGRATIONVESSEL ENGINEERING REVIEW
Capacity is selected first. Installation is approved next.
Intake & dischargeSeacock, feed route, prefiltration, drain and brine discharge.Electrical dutyVoltage, protection, cable sizing, batteries, charging and operating time.Space & service accessFootprint, ventilation, drainage, vibration and maintainable component access.Product-water integrationTank connection, flushing, sampling and onboard distribution interfaces.
Start vessel review TECHNICAL DATA BOUNDARY
What the final proposal must still confirm.
The source confirms the displayed capacity, conductivity, voltage family, codes and approved net prices. The fields below are not present in the available data and are not inferred.
Selected 12 or 24 V arrangementRated and operating electrical loadDimensions, dry mass and mounting layoutPump and membrane configurationOperating pressure, rejection and permeate qualityRecovery and pretreatment packageControl functions and alarm scopeGuaranteed performance conditions
DESAL YACHT60 FAQ
Answers before the technical proposal.
01How much water can DESAL YACHT 60 produce per day?
At the nominal catalog rate, 60 L/h corresponds to 240 litres in 4 hours, 480 litres in 8 hours or 720 litres in 12 hours. These are arithmetic planning values, not a performance guarantee. Actual output depends on seawater temperature, salinity, pressure, membrane condition and installation.
02What is the difference between DESAL YACHT 60 PRO and PRO Touch?
Both belong to the same 60 L/h capacity family. The confirmed public distinction is the control configuration: PRO uses the standard control route and PRO Touch uses the Touch control route. Final controls, electrical arrangement and accessories are confirmed in the proposal.
03Can I choose the model only from crew size?
Crew size is one input. Showers, galley, laundry, deck wash, reserve, tank volume, cruising pattern and available operating hours should be converted into a total daily demand before the final model is selected.
04Are voltage and power consumption fixed online?
The DESAL YACHT family follows a 12/24 V marine platform, but the selected voltage, protection, cable sizing, battery or generator duty and exact electrical data must be confirmed for the model and vessel before supply.
05What must be checked before installation?
Confirm the seawater intake, prefiltration, feed conditions, installation footprint, service access, ventilation, drainage, brine discharge, electrical supply, product-water tank connection and commissioning scope.
READY FOR MODEL CONFIRMATION?
Send the vessel, daily demand and available power.
CWG will confirm the 60 L/h capacity route, PRO or PRO Touch configuration and the installation scope.