DESAL-SWRO PM-C · COMPACT FIXED-INSTALLATION SWRO

PM-175-C
729.17L/h

A source-confirmed compact configuration with verified HP pump, VFD status, unit dimensions, prefilter reference, STD code and approved net price.

MAXIMUM CONDUCTIVITY56,000µS/cm
DESAL-SWRO-PM-175-C compact seawater reverse osmosis system 729.17 L/h
STD-0097COMPACT PM-C CONFIGURATION
CONFIRMED PRODUCT17,500L/day5.5 kW HP pump€37,405 reference
729.17L/hNOMINAL OUTPUT
40,000ppmSOURCE FEED REFERENCE
5.5kWHIGH-PRESSURE PUMP
VFD ·YesCONFIRMED STATUS
STD-0097PUBLIC STD CODE

CONFIRMED PRODUCT DATA

Compact equipment data for preliminary selection.

The values below belong specifically to STD-0097. Unit dimensions and the prefilter or vessel reference are separate source fields.

Check capacity with Finder
Nominal output729.17L/h
Daily capacity17,500L/day
Maximum feed56,000µS/cm
HP pump5.5kW
VFDYes
Power notationII–III
Unit dimensions740 × 1,380 × 760 mm
Prefilter / vesselØ530 × V2000 mm
approved net price€37,405

PRODUCTION PLANNING

Nominal water volume by operating time.

Use the arithmetic output for early storage and runtime planning, then verify the selected duty with actual seawater conditions.

Operating timeCalculated nominal volume
4 hours2,916.68L
6 hours4,375.02L
8 hours5,833.36L
12 hours8,750.04L
20 hours14,583.4L
Calculation: 729.17 L/h × operating hours. This is not a guaranteed project duty.

CONFIRMED INSTALLATION ENVELOPE

740 × 1,380 × 760 mm

The separate source reference for the prefilter or vessel is Ø530 × V2000 mm. A complete installation layout also requires service access, valves, piping, drainage, electrical panels, intake equipment and product-water storage.

UNIT ENVELOPE740 × 1,380 × 760 mmPREFILTER / VESSELØ530 × V2000 mmHP PUMP5.5kWVFDYes

TECHNICAL DATA BOUNDARY

Confirmed equipment data is not a performance guarantee.

The following fields are absent from the current PM-C master record and remain unfilled.

Salt rejection and permeate qualityAverage operating pressureMaximum operating pressureRecommended and minimum inlet pressureBooster-pump powerDry and shipping massMembrane configuration and recoveryGuaranteed project performance

DESAL-SWRO-PM-175-C FAQ

Answers before the approved proposal.

01What is the confirmed output of DESAL-SWRO-PM-175-C?

The catalog record confirms 729.17 L/h or 17,500 L/day. Final guaranteed production still depends on verified seawater and approved operating conditions.

02Which pump and VFD data is confirmed for STD-0097?

The confirmed high-pressure pump rating is 5.5 kW and VFD is recorded as Yes. Booster-pump power is not confirmed.

03How should the dimensions be used?

The source unit envelope is 740 × 1,380 × 760 mm, with a separate prefilter or vessel reference of Ø530 × V2000 mm. A complete layout must add pipework, valves, electrical equipment, service clearance, drainage and storage interfaces.

04Is II–III a complete electrical specification?

No. II–III is retained exactly as source notation. Final voltage, phase arrangement, frequency, connected load and protection require selected-code confirmation.

05Is the approved net price a final quotation?

No. €37,405 is a approved net equipment price, excluding VAT and transport, EXW CWG Croatia. Technical scope follows project approval.

READY FOR PM-C CONFIRMATION?

Send seawater analysis, demand and installation data.

CWG will confirm STD-0097, pretreatment, electrical interfaces, guaranteed duty and final commercial scope.