DESAL-SWRO PM-C · COMPACT FIXED-INSTALLATION SWRO
PM-30-C
125L/h
A source-confirmed compact configuration with verified HP pump, VFD status, unit dimensions, prefilter reference, STD code and approved net price.
MAXIMUM CONDUCTIVITY56,000µS/cm
STD-0090COMPACT PM-C CONFIGURATION
CONFIRMED PRODUCT3,000L/day2.2 kW HP pump€17,350 reference
125L/hNOMINAL OUTPUT
40,000ppmSOURCE FEED REFERENCE
2.2kWHIGH-PRESSURE PUMP
VFD ·NoCONFIRMED STATUS
STD-0090PUBLIC STD CODE
CONFIRMED PRODUCT DATA
Compact equipment data for preliminary selection.
The values below belong specifically to STD-0090. Unit dimensions and the prefilter or vessel reference are separate source fields.
Check capacity with FinderPRODUCTION PLANNING
Nominal water volume by operating time.
Use the arithmetic output for early storage and runtime planning, then verify the selected duty with actual seawater conditions.
Operating timeCalculated nominal volume
4 hours500L
6 hours750L
8 hours1,000L
12 hours1,500L
20 hours2,500L
Calculation: 125 L/h × operating hours. This is not a guaranteed project duty.CONFIRMED INSTALLATION ENVELOPE
690 × 1,400 × 690 mm
The separate source reference for the prefilter or vessel is Ø334 × V1,506 mm. A complete installation layout also requires service access, valves, piping, drainage, electrical panels, intake equipment and product-water storage.
UNIT ENVELOPE690 × 1,400 × 690 mmPREFILTER / VESSELØ334 × V1,506 mmHP PUMP2.2kWVFDNo
TECHNICAL DATA BOUNDARY
Confirmed equipment data is not a performance guarantee.
The following fields are absent from the current PM-C master record and remain unfilled.
Salt rejection and permeate qualityAverage operating pressureMaximum operating pressureRecommended and minimum inlet pressureBooster-pump powerDry and shipping massMembrane configuration and recoveryGuaranteed project performance
DESAL-SWRO-PM-30-C FAQ
Answers before the approved proposal.
01What is the confirmed output of DESAL-SWRO-PM-30-C?
The catalog record confirms 125 L/h or 3,000 L/day. Final guaranteed production still depends on verified seawater and approved operating conditions.
02Which pump and VFD data is confirmed for STD-0090?
The confirmed high-pressure pump rating is 2.2 kW and VFD is recorded as No. Booster-pump power is not confirmed.
03How should the dimensions be used?
The source unit envelope is 690 × 1,400 × 690 mm, with a separate prefilter or vessel reference of Ø334 × V1506 mm. A complete layout must add pipework, valves, electrical equipment, service clearance, drainage and storage interfaces.
04Is II–III a complete electrical specification?
No. II–III is retained exactly as source notation. Final voltage, phase arrangement, frequency, connected load and protection require selected-code confirmation.
05Is the approved net price a final quotation?
No. €17,350 is a approved net equipment price, excluding VAT and transport, EXW CWG Croatia. Technical scope follows project approval.
READY FOR PM-C CONFIRMATION?
Send seawater analysis, demand and installation data.
CWG will confirm STD-0090, pretreatment, electrical interfaces, guaranteed duty and final commercial scope.