DESAL-SWRO PM-C · COMPACT FIXED-INSTALLATION SWRO

PM-85-C
354.17L/h

A source-confirmed compact configuration with verified HP pump, VFD status, unit dimensions, prefilter reference, STD code and approved net price.

MAXIMUM CONDUCTIVITY56,000µS/cm
DESAL-SWRO-PM-85-C compact seawater reverse osmosis system 354.17 L/h
STD-0093COMPACT PM-C CONFIGURATION
CONFIRMED PRODUCT8,500L/day4 kW HP pump€23,220 reference
354.17L/hNOMINAL OUTPUT
40,000ppmSOURCE FEED REFERENCE
4kWHIGH-PRESSURE PUMP
VFD ·YesCONFIRMED STATUS
STD-0093PUBLIC STD CODE

CONFIRMED PRODUCT DATA

Compact equipment data for preliminary selection.

The values below belong specifically to STD-0093. Unit dimensions and the prefilter or vessel reference are separate source fields.

Check capacity with Finder
Nominal output354.17L/h
Daily capacity8,500L/day
Maximum feed56,000µS/cm
HP pump4kW
VFDYes
Power notationII–III
Unit dimensions690 × 1,400 × 690 mm
Prefilter / vesselØ410 × V1,835 mm
approved net price€23,220

PRODUCTION PLANNING

Nominal water volume by operating time.

Use the arithmetic output for early storage and runtime planning, then verify the selected duty with actual seawater conditions.

Operating timeCalculated nominal volume
4 hours1,416.68L
6 hours2,125.02L
8 hours2,833.36L
12 hours4,250.04L
20 hours7,083.4L
Calculation: 354.17 L/h × operating hours. This is not a guaranteed project duty.

CONFIRMED INSTALLATION ENVELOPE

690 × 1,400 × 690 mm

The separate source reference for the prefilter or vessel is Ø410 × V1,835 mm. A complete installation layout also requires service access, valves, piping, drainage, electrical panels, intake equipment and product-water storage.

UNIT ENVELOPE690 × 1,400 × 690 mmPREFILTER / VESSELØ410 × V1,835 mmHP PUMP4kWVFDYes

TECHNICAL DATA BOUNDARY

Confirmed equipment data is not a performance guarantee.

The following fields are absent from the current PM-C master record and remain unfilled.

Salt rejection and permeate qualityAverage operating pressureMaximum operating pressureRecommended and minimum inlet pressureBooster-pump powerDry and shipping massMembrane configuration and recoveryGuaranteed project performance

DESAL-SWRO-PM-85-C FAQ

Answers before the approved proposal.

01What is the confirmed output of DESAL-SWRO-PM-85-C?

The catalog record confirms 354.17 L/h or 8,500 L/day. Final guaranteed production still depends on verified seawater and approved operating conditions.

02Which pump and VFD data is confirmed for STD-0093?

The confirmed high-pressure pump rating is 4 kW and VFD is recorded as Yes. Booster-pump power is not confirmed.

03How should the dimensions be used?

The source unit envelope is 690 × 1,400 × 690 mm, with a separate prefilter or vessel reference of Ø410 × V1835 mm. A complete layout must add pipework, valves, electrical equipment, service clearance, drainage and storage interfaces.

04Is II–III a complete electrical specification?

No. II–III is retained exactly as source notation. Final voltage, phase arrangement, frequency, connected load and protection require selected-code confirmation.

05Is the approved net price a final quotation?

No. €23,220 is a approved net equipment price, excluding VAT and transport, EXW CWG Croatia. Technical scope follows project approval.

READY FOR PM-C CONFIRMATION?

Send seawater analysis, demand and installation data.

CWG will confirm STD-0093, pretreatment, electrical interfaces, guaranteed duty and final commercial scope.